Expert Answers about Viking Viking Epic Camper

• Parts Needed to Add Electric Drum Brakes to a 2004 Viking Epic Model M2007
• First and foremost, thank you for your service to our country. It is greatly appreciated. Ultimately you are correct that the most accurate way to determine the correct hub and drum assembly is to pull the hub and find the bearing and grease seal numbers or at least use a digital caliper to measure the spindle where they sit. However, there are a few pieces of info that we can possibly piece together to make an educated guess as to what you have. We do have the Dexter Axle Trailer Hub...
  view full answer...


• Replacement Wheel and Tire for 2003 Viking Epic 1706
• For a wheel and tire combo for your 2003 Viking Epic 1706 in the size of 4.80-12 the Kenda 4.80-12 on Aluminum Wheel part # AM30677 would work great.
  view full answer...


• Maximum Crossbar Spread For The Swagman Upright Bike Rack for 1 Bike
• The Swagman Upright Bike Rack for 1 Bike # S64720 has U-bolt mounting holes running down the center of the entire wheel tray allowing the rack to attach to a maximum crossbar spread of 52" (from center to center of the crossbars). This means you would be able to attach the rack to your Swagman Roamer LT Roof Rack # S80510 with a 48" crossbar spread.
  view full answer...


• Replacement Idler Hub For 2004 Viking Epic 1906ST Pop Up Camper
• To verify which hub will best fit your 2004 Viking Epic 1906ST popup you are going to need to disassemble a hub to check the bearings and seals. The only information I could find is you have a 2,200lb AL-KO torsion axle. This should use the Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-2-EZ-2K which uses the same inner and outer Bearing # L44649(1.063" inner diameter) and a Grease Seal # 10-9(1.500" inner diameter). It has a 5 on 4-1/2" bolt pattern which you can verify is stamped...
  view full answer...